(Dimensions
are shown in inches for convenience.)
|
(Dimensions
are shown in inches for convenience.)
|
| To
Build:Made
from a 1/4" thick piece of masonite or plywood.Cut
a 6" square hole in the center of the board.Handles
(such as those used on drawers) are attached above and below the cave opening
as shown.Pipe clamps are fastened
10" apart as shown to allow the cave structure to slide on the conduit.The
clamps should be adjusted to hold the cave in place, but still allow the
cave to slide when force is applied to the handles. Click here
to return to How to Build. |
|
|